With the objective of introducing antifouling characteristics into interpolymer types of cation and anion exchange membranes, the surface of these membranes was coated with a 12-microm-thick urethane acrylate layer and was cured by UV radiation of wavelengths 308 and 172 nm under a complete inert atmosphere. Different urethane acrylate composite ion exchange membranes developed were characterized in NaCl solution by measuring their ion-exchange capacity, volume fraction of water, contact angle with water, membrane conductance, and membrane potential. It was found that the electrochemical transport properties of urethane acrylate composite cation-exchange membranes were increased due to resonance stabilization of the urethane group, which acts as a weak acid and dissociates as a negatively charged urethane ion and a positively charged proton. This contributes toward the net charge density of the membrane matrix responsible for enhanced selectivity and conductivity, while for urethane acrylate composite anion-exchange membranes reduction in net charge density was responsible for reduction in electrochemical transport properties. Counterion transport number, permselectivity, and counterion diffusion coefficient values for these membranes were also estimated. Experiments were also carried out in higher homologs of sodium carboxylate solutions in order to observe the fouling tendencies of these membranes. It was concluded that it is possible to obtain antifouling characteristics of ion-exchange membranes by coating and curing thin hydrophilic layers of urethane acrylate on their surfaces without sacrificing their electrochemical transport properties.