Corrosion resistance, mechanical properties, corrosion fatigue strength and cytocompatibility of new Ti alloys without Al and V

Biomaterials. 1998 Jul;19(13):1197-215. doi: 10.1016/s0142-9612(97)00235-4.

Abstract

The effects of various metallic ions using various metallic powders on the relative growth ratio of fibroblasts L929 and osteoblasts MC3T3-E1 cells were carried out. Ti, Zr, Sn, Nb and Ta had evidently no effect on the relative growth ratios of cells. Otherwise, Al and V ions exhibit cytotoxicity from a concentration of > or = 0.2 ppm. This Al effect on cells tend to be stronger in medium containing small quantity of V ions (< or = 0.03 ppm). The new Ti-15%Zr-4%Nb-4%Ta-0.2%Pd alloy exhibited a higher corrosion resistance in physiological saline solution. The addition of 0.02%O and 0.05%N to Ti-Zr alloy improved the mechanical properties at room temperature and corrosion fatigue strength. The relative growth ratios for the new Ti alloy plate and the alloy block extraction were unity. Further, the relative growth ratios were almost unity for the new Ti alloy against apatite ceramic pins up to 10(5) wear cycles in Eagle's MEM solution. However, there was a sharp decrease for Ti-6%Al-4%V ELI alloy from 3 x 10(4) wear cycles as V ion was released during wear into the wear test solution since the pH of the Eagle's MEM increases with increasing wear cycles.

Publication types

  • Comparative Study

MeSH terms

  • 3T3 Cells
  • Alloys / chemistry*
  • Alloys / pharmacology
  • Aluminum
  • Animals
  • Biocompatible Materials / chemistry*
  • Biocompatible Materials / pharmacology
  • Biomechanical Phenomena
  • Cell Division / drug effects
  • Cell Line
  • Corrosion
  • Mice
  • Niobium
  • Palladium
  • Prostheses and Implants
  • Titanium*
  • Vanadium
  • Zirconium

Substances

  • Alloys
  • Biocompatible Materials
  • Vanadium
  • Niobium
  • Palladium
  • Zirconium
  • Aluminum
  • Titanium