Influence of the Cross-Sectional Shape and Corner Radius on the Compressive Behaviour of Concrete Columns Confined by FRP and Stirrups

Axial compression tests were carried out on 72 FRP (fiber reinforced polymer)-stirrup composite-confined concrete columns. Stirrups ensure the residual bearing capacity and ductility after the FRP fractures. To reduce the effect of stress concentration at the corners of the confined square-section concrete columns and improve the restraint effect, an FRP-stirrup composite-confined concrete structure with rounded corners is proposed. Different corner radii of the stirrup and outer FRP were designed, and the corner radius of the stirrup was adjusted accurately to meet the designed corner radius of the outer FRP. The cross-section of the specimens gradually changed from square to circular as the corner radius increased. The influence of the cross-sectional shape and corner radius on the compressive behaviour of FRP-stirrup composite-confined concrete was analysed. An increase in the corner radius can cause the strain distribution of the FRP to be more uniform and strengthen the restraint effect. The larger the corner radius of the specimen, the better the improvement of mechanical properties. The strength of the circular section specimen was greatly improved. In addition, the test parameters also included the FRP layers, FRP types and stirrup spacing. With the same corner radius, increasing the number of FRP layers or densifying the stirrup spacing effectively improved the mechanical properties of the specimens. Finally, a database of FRP-stirrup composite-confined concrete column test results with different corner radii was established. The general calculation models were proposed, respectively, for the peak points, ultimate points and stress-strain models that are applicable to FRP-, stirrup- and FRP-stirrup-confined concrete columns with different cross-sectional shapes under axial compression.