NCBI Logo
GEO Logo
   NCBI > GEO > Accession DisplayHelp Not logged in | LoginHelp
GEO help: Mouse over screen elements for information.
          Go
Platform GPL13758 Query DataSets for GPL13758
Status Public on Jun 24, 2011
Title New Zealand White Rabbit Heart 15K cDNA array
Technology type spotted DNA/cDNA
Distribution non-commercial
Organism Oryctolagus cuniculus
Manufacturer Harvard FAS Center for Systems Biology
Manufacture protocol cDNA Library : Isolation of total heart (atria and ventricles)RNA: RNA was isolated from New Zealand rabbit (15-20 weeks; 3 to 4 kg) heart in an RNase-free environment using RNase-free lab-wear, materials and equipment according to the procedure as described by Chomczynski and Sacchi (Anal Biochem 162:156-15). In brief tissue was pulverized under liquid nitrogen using mortar and pestle and extracted two times in acidic guanidinium isothiocyanate-phenol-chloroform and incubated for 5 min. at room temperature to permit the complete dissociation of nucleoprotein complexes. The mixture was centrifuged at 14,000x g for 15 min. at 4oC. Following centrifugation, the aqueous phase containing the RNA was carefully removed and transferred to a new tube containing 0.5 mL isopropanol and incubated for 10 min. at room temperature to precipitate the RNA. The RNA was collected by centrifugation at 14,000x g for 20 min. at 4oC. The RNA pellet washed with 1 mL of room temperature 75% ethanol, re-centrifuged and the RNA pellet air-dried and dissolved in DEPC-treated H2O.
POLY(A)+ RNA fractions were enriched by oligo(dT) cellulose chromatography. In brief, 1 mg of total RNA was adjusted to 0.55 mg/mL RNA concentration in DEPC-treated H2O, and incubated for 5 min. at 650C and then chilled on ice. The salt concentration was adjusted to 0.5M NaCl and the RNA sample mixed with 1 mL of oligo(dT) cellulose. The suspension was incubated for 10 min. at 37oC to allow the mRNA to bind to the oligo(dT) cellulose. The unbound RNA was eluted and re-heated for 5 min. at 65 oC, chilled on ice and re-suspended in the oligo(dT) cellulose. The unbound RNA was washed from the column with a low salt buffer and the bound mRNA eluted from the oligo(dT) cellulose beads with 1 mL H2O (65 oC). The eluted mRNA was re-heated for 5 min. at 65 oC, chilled on ice and re-suspended in the oligo(dT) cellulose and then eluted as described above in order to further reduce any rRNA contamination. Fractions (200 uL) was collected in microfuge tubes. Positive fractions containing mRNA were determined by UV spectrophotometric analysis, pooled and the mRNA precipitated overnight, at -20oC with 50 ug/mL glycogen, 0.1 volume 7.5 M ammonium acetate and 2 volumes ethanol (-20 oC) and then collected by centrifugation at 14,000x g for 30 min. at 4 oC. The mRNA pellet was washed twice with 75% ethanol, air-dried and dissolved in DEPC-treated H2O. The mRNA yield was determined by UV spectrophotometric analysis (260 nm) with the quality of the mRNA determined by gel electrophoresis on a 1% agarose gel containing 3% formaldehyde, 0.02 M MOPS pH 7.4 (3-[N-morpholino] propanesulfonic acid) and 0.001 M disodium EDTA (ethylenediamine tetraacetic acid) .
cDNA LIBRARY CONSTRUCTION: cDNA libraries were constructed using the SuperScript Plasmid System (GibcoBRL, cat. No.18248-013) according to the manufacturer’s instructions. The cDNAs were ligated into the plasmid vector pSPORT 1 (4,109 bp) and then transformed into DH5 competent cells (GibcoBRL, Cat. No.10643-013) according to the manufacturer’s instructions.
Estimation of cDNA library size was performed by titration of transformed bacteria on LB-agar plates (1% bacto-tryptone, 0.5% bacto-yeast extract, 1% NaCl, 1.5% bacto-agar)containing IPTG/X-gal (0.02 ug/mL each)and ampicillin (75 ug/mL). Aliquots of cDNA libraries were stored in 7% DMSO at -80oC.
Estimation of cDNA insert size was determined by random selection of cDNA clones from IPTG/X-gal LB-agar plates containing ampicillin. In brief, single isolated cDNA clones were selected and used to inoculate 2 mL LB liquid media (1% bacto-tryptone, 0.5% bacto-yeast extract, 1% NaCl) containing ampicillin (75 ug/mL) and incubated overnight at 500 rpm at 37oC in a New Brunswick incubator. The recombinant bacteria werre chilled on ice and the recombinant bacterial pellet collected by brief centrifugation. Plasmid cDNA was isolated by alkaline lysis using Qiagen columns (cat. No. 12125) and the plasmid DNA precipitated with 0.6 volumes isopropanol by centrifugation at 14,000x g for 30 min. The cDNA pellet was washed twice with 70% ethanol, air-dried and dissolved in TE buffer (10 mM Tris-HCl, pH 8.0; 0.1 mM EDTA, pH 8.0). The purified plasmid cDNA was digested for 1 hour at 37oC in a reaction mixture containing a 3-fold excess of the restriction enzyme Mlu I (New England Biolabs, Cat. No. R0198S) which cleaves the unique restriction enzyme sites located at the termini of the cDNA insert distal to the Not I and Sal I insertion sites. The digested cDNA was resolved on a 1% agarose gel in 40 mM Tris-acetate and 2 mM EDTA (TAE) and the gel stained with ethidium bromide then photographed under UV illumination. DNA molecular weight markers (1 kb; New England Biolabs; 323-2S) were used for estimation cDNA molecular weights.
Isolation and growth: cDNA libraries were plated at low density on IPTG/X-gal LB-agar plates containing ampicillin (75 ug/mL) and incubated overnight at 37oC. The following day cDNA clones were selected, individually and used to inoculate individual wells in 96-well culture blocks (USA Scientific, Cat. No.7556-9600) containing 1.3 mL/well liquid LB media containing ampicillin (75ug/mL) and the plates oriented and labeled to indicate clonal position and then sealed with Breathe–Easy sealing film (USA Scientific) and incubated overnight at 500 rpm at 37oC in a New Brunswick incubator.
Replicate plates were produced following overnight incubation by removing 100 uL samples from each well in 96-well culture blocks for the inoculation of replicate wells in 96-well culture blocks containing 0.9 mL/well liquid LB media containing ampicillin (75 ug/mL). The replicate plates were oriented, labeled in the same manner as above, sealed with Breathe–Easy sealing film (USA Scientific) and incubated overnight at 500 rpm at 37oC in a New Brunswick incubator. Following overnight incubation replicate plates were cooled on ice and glycerol added to a final concentration of 20 % /well and the plates sealed with Thermowell sealers (Costar 6524) and stored at –80oC.
5’ Sequencing: Plasmid cDNA were isolated by Qiagen Bio Robot 8000 automated nucleic acid purification and liquid handling workstation available for use by our laboratory through core facilities. Purified cDNAs were sequenced using the Applied Biosystems Taq DyeDeoxy Terminator cycle sequencing kit which utilizes a fluorescently-labeled dideoxy-nucleotide chain termination method. After cycle sequencing and clean up the DNA samples were resolved by capillary electrophoresis on an PE BIOSYS 3700 automated sequencer which translates the fluorescent signals into their corresponding base pair sequence.
Sequence analysis of all cDNAs was performed against the non-redundant GEN Bank/ EMBL/ DDBJ nucleotide, the non-redundant Gen Bank CDS translation/ PDB/ Swiss Prot/ PIR/ PRF peptide and the dbEST databases using the BLAST algorithm on a UNIX platform. Assignment of putative identity for cDNAs exhibiting matches to known genes required a maximum value of E=1e-25 (minimum p=10-10)and nucleotide sequence identity >95%. Prior to analysis of sequence data, sequence quality were evaluated using the accuracy assessment program phred of the phred/phrap/consed assembly package. All sequence traces from the ABI model sequencer werebe saved in fasta output format.
Sequence submission and storage: Sequence quality was evaluated using the accuracy assessment program phred of the phred/phrap/consed assembly package. All sequence traces were saved in fasta output format. Sequence analysis was performed against the non-redundant GEN Bank/ EMBL/ DDBJ nucleotide, the non-redundant Gen Bank CDS translation/ PDB/ Swiss Prot/ PIR/ PRF peptide and the dbEST databases using the BLAST algorithm on a UNIX platform . All cDNA’s were 5’ sequenced and are available under accession numbers EC618425-EC626095 and dbEST40150263-40157933 and at www.mccull
Support glass
Coating amino-silane
 
Description New Zealand White Rabbit Heart; male, new born- 3 week recovery
 
Contributor(s) McCully JD
Submission date Jun 22, 2011
Last update date Jun 24, 2011
Contact name James D McCully
E-mail(s) James_mccully@hms.harvard.edu
Phone 617-667-0725
Fax 617-975-5245
Organization name BIDMC/Harvard Medical School
Department Cardiothoracic Surgery
Street address 77 Avenue Louis Pasteur
City Boston
State/province MA
ZIP/Postal code 02115
Country USA
 
Samples (27) GSM747418, GSM747419, GSM747420, GSM747421, GSM747422, GSM747423 
Series (2)
GSE30194 Rabbit heart gene expression in Left ventricle (LV) following banding of the descending thoracic aorta (AOB-LV) vs Sham-control LV and in Right ventricle (RV) following banding the pulmonary artery (PAB-RV) vs. Sham-control RV
GSE30261 Mature and aged Male and female rabbit heart gene expression in global ischemia and cardioplegia

Data table header descriptions
ID cDNA Reference number
ID_Plating cDNA cDNA number for plating
Block Block number
Column Column number cDNA assigned to
Row Row number cDNA assinged to
dBest ACC dBest accession number
GB_ACC GenBank Accession number
Similar to ID Rabbit heart cDNA sequence similar to Gen Bank accession number
cDNA simialr to Rabbit heart cDNA sequence similar to Gen Bank accession number submission described as
SPOT_ID control, blank, etc.

Data table
ID ID_Plating cDNA Block Column Row dBest ACC GB_ACC Similar to ID cDNA simialr to SPOT_ID
1 1393200 1 1 1 40156707 EC624869 AF217756 Homo sapiens protocadherin-beta2 (PCDHB2)
2 1393200 1 2 1 40156707 EC624869 AF217756 Homo sapiens protocadherin-beta2 (PCDHB2)
3 1 3 1 40150797 EC618959 AJ001588 Oryctolagus cuniculus mtCOI
4 1 4 1 40150797 EC618959 AJ001588 Oryctolagus cuniculus mtCOI
5 1393201 1 5 1 40150771 EC618933 NM_004453 Homo sapiens electron-transferring-flavoprotein dehydrogenase
6 1393201 1 6 1 40150771 EC618933 NM_004453 Homo sapiens electron-transferring-flavoprotein dehydrogenase
7 1393202 1 7 1 40150797 EC618959 AJ001588 Oryctolagus cuniculus mt16S rRNA
8 1393202 1 8 1 40150797 EC618959 AJ001588 Oryctolagus cuniculus mt16S rRNA
9 1393203 1 9 1 40150793 EC618955 BC004534 Homo sapiens Similar to splicing factor proline/glutamine rich
10 1393203 1 10 1 40150793 EC618955 BC004534 Homo sapiens Similar to splicing factor proline/glutamine rich
11 1393204 1 11 1 AY009128 Homo sapiens ISCU2 (ISCU) Homo sapiens ISCU2 (ISCU)
12 1393204 1 12 1 AY009128 Homo sapiens ISCU2 (ISCU) Homo sapiens ISCU2 (ISCU)
13 1393205 1 13 1 BC003378 Homo sapiens high-mobility group (nonhistone chromosomal) protein 1 Homo sapiens high-mobility group (nonhistone chromosomal) protein 1
14 1393205 1 14 1 BC003378 Homo sapiens high-mobility group (nonhistone chromosomal) protein 1 Homo sapiens high-mobility group (nonhistone chromosomal) protein 1
15 1393206 1 15 1 40150298 EC618460 NM_007421 Mus musculus adenylosuccinate synthetase 1, muscle (Adss1
16 1393206 1 16 1 40150298 EC618460 NM_007421 Mus musculus adenylosuccinate synthetase 1, muscle (Adss1
17 1393207 1 17 1 40150302 EC618464 UNKNOWN unknown
18 1393207 1 18 1 40150302 EC618464 UNKNOWN unknown
19 1393208 1 19 1 BC007008 Homo sapiens crystallin, alpha B, clone MGC:12326 Homo sapiens crystallin, alpha B, clone MGC:12326
20 1393208 1 20 1 BC007008 Homo sapiens crystallin, alpha B, clone MGC:12326 Homo sapiens crystallin, alpha B, clone MGC:12326

Total number of rows: 15488

Table truncated, full table size 1358 Kbytes.




Download family Format
SOFT formatted family file(s) SOFTHelp
MINiML formatted family file(s) MINiMLHelp

Supplementary data files not provided

| NLM | NIH | GEO Help | Disclaimer | Accessibility |
NCBI Home NCBI Search NCBI SiteMap