Hexavalent chromium removal by multilayer membrane assisted by photocatalytic couple nanoparticle from both permeate and retentate

J Hazard Mater. 2018 Feb 15:344:12-22. doi: 10.1016/j.jhazmat.2017.09.059. Epub 2017 Oct 3.

Abstract

In this study, a novel photocatalytic thin film nanocomposite (TFC) membrane was prepared for removal of hexavalent chromium (Cr(VI)) from aqueous solution. In this regards, a TFC membrane was modified by a layer of chitosan as an adsorbent and then was coated with a layer of synthesized photocatalytic nanoscale zerovalent iron@titanium dioxide (nZVI@TiO2) nanoparticles via layer-by-layer (LBL) technology. Prepared membranes were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and contact angle analysis. The Cr(VI) removal efficiency of the membranes was evaluated by batch removal and dynamic filtration tests. The water flux was increased from 26.2 to 39.7l/m2h as a consequence of improved hydrophilicity which was approved by contact angle analysis. The modified TFC membrane has shown the significant removal of Cr(VI) in retentate as well as the permeate stream. Further, the Cr(VI) removal of retentate flow decreased with increasing pH and feed concentration whereas the Cr(VI) removal of permeate was enhanced with increasing initial feed concentration. Increasing the flux recovery from 62% (for neat TFC) to 87% (for modified TFC membrane) demonstrated that the modification of membrane improved the anti-fouling property of the modified membrane.

Keywords: Cr(VI) removal; Layer by layer; Retentate; Surface modification; TFC membrane.